ADHESIVE

We offer a complete line of adhesive for use with acrylics, vinyls, polycarbonate and other materials including metal and wood materials.

And because choosing the right adhesive can be difficult, we offer you technical support, samples and comprehensive product literature to assist you in making your decision.

A wide range of industrial adhesive is available. To get an excellent result in bonding two or more materials together, an appropriate adhesive is essential.

Weld-On

Weld-on will make the strongest, most attractive finished products. Whether your application calls for strength, weather resistance, clear seams or quick set. We have the right adhesive to fit your needs.

Weld-on leads the adhesive industry with the most complete line of solvent cements and adhesives for use with acrylics, vinyls, polycarbonate, PETG and other plastics, as well as with non-plastic materials.

Choosing the right adhesive can be difficult; therefore we offer technical support and comprehensive product literature to assist you in your choice

Advantages of "WELD-ON" are:

• No hand mixing

• Reduces fabrication time

• Eliminates waste

• Reduces odors

• Lower volatile emissions

• Bond most plastics & metals

• Consistent high strength bonds

Acrifix 192

One-component polymerization adhesive. Clear, purplish viscous solution of an acrylic polymer in methyl methacrylate, which polymerizes on exposure to light.

Applications: Preferable for bonding transparent edge and acrylic.

Safety Measures and Health Protection Labelling acc to Directive 1999/45/EC. Highly flammable (F), Irritant (Xi). Contains methyl methacrylate. Irritating to eyes, respiratory system, skin. Sensitization by skin contact possible. Keep away from sources of ignition and do not smoke. Avoid contact with skin. In the event of contact with eyes, rinse immediately with plenty of water and consult a doctor. Wear suitable protective gloves.

Storage/Transport: Keep container tightly closed in a cool place protected against light.

Working Instruction: Preparing the parts to be bonded. Degrease the surfaces to be bonded with water containing a wetting agent (washing-up liquid), or with THINNER and CLEANER 30. Internally stressed parts must be annealed before bonding in order to avoid stress cracking.